Phones:
800-218-1375 or 336-889-8088
Fax:
336-889-0014
e-mail:
thayercraft@cs.com
710 W. Green Drive, High
Point, NC 27260
.jpg)
v
|
|
|
Style 106
(41" x 108")
|
Here is some
of the nicest 3/4 ounce(0.73 oz/sq.yd)fiberglass cloth
you'll find.
Pay just
$14.00 shipping included for any quantity you want and have
three yards of this material delivered right to your door or
P.O. box. Each 3 yard pack is comprised of a piece
that is 41" wide and 108" long. That is 3.4 square yards and
30.75 square feet. The 3/4 oz is finished in one of
the softest and most advanced Silanes on the market and is
good for any resin. It is folded from one end to the
other and placed in a Ziploc bag so you can keep it nice and
fresh and good to use years down the road if you don't get
around to using it all right away. |
Style 106
(41" x 108")
US $14.00
Free shipping to the
48 continental states
|
|
3 Yard Pack
|
Style
6060 (38 x 108")
(38 x 108")
|
Here is a 3 yard pack of some nice 1.19 ounce fiberglass
cloth. It is Style Number 6060 - It has a thread count of 60
x 60 threads per inch.
It is a perfectly balanced fiberglass fabric. It has the
ECDE yarn which is a fine filament with some of the highest
strength for E-Glass. The thickness is just 0.0019". Pay
just $13.19 with free shipping. This cloth is 38" wide and
108" long. It is folded from one end to the other and
placed in a Ziploc bag so you can keep it nice and fresh and
good to use years down the road if you don't get around to
using it all right away |
Style
6060 (38 x 108")
US
$13.19
Free shipping to the
48 continental states
|
 |
Style 1080
(38 x 108")
|
38" x 108" long piece of the 1.43 oz finished in
Volan. This is very soft and pliable material great for doing
finish layers in prototyping, etc.
Folded from one end to the
other and packed in a Ziplock bag measuring 10-9/16" x 11".
|
Style 1080
(38 x 108")
US $ 14.80
Free shipping to the
48 continental states |
|
|
Style 2113
(50 x 108")
|
For
sale at just $ 13.99 including shipping is a 50" wide by
108" long piece of some 2.3 ounce fiberglass cloth. It is
Style Number 2113 - It has a thread count of 60 x 56 threads
per inch. It's E-glass and has the ECE-1/0 yarn in the warp
and ECD 450-1/0 yarn in the fill. The thickness of this
fabric is 0.0031". It is finished with a silane for epoxy
resins. Since we have about a half million yards of this
material in stock we are letting this cloth go for no more
than the cost of packing it, putting it in a zip lock bag
and in the priority mail box. Pay just $ 13.99 for 3 linear
yards (4.16 square yards) and we'll send it right out. It is
folded from one end to the other so you can unfold a little
at a time and don't have to unfold the whole piece to cut
off a little. The three yards are placed in a zip lock bag
so you can reseal it to keep it fresh. |
Style 2113
(50 x 108")
37.5 sq ft pack of fiberglass cloth
US $13.99
Free shipping to the
48 continental states
|
|
3 Yard Pack
|
Style 1125
(50.5 x
108")
|
This is for a big chunk of some nice 2.6 oz/sq yd
fiberglass cloth. For just
US $15.25 per pack shipping included.
Have any number of packs of this material delivered
right to your door or P.O. box. Each pack is
comprised of a piece that is 50.5" wide and 108"
long. That is 4.2 square yards and 37.8 square feet.
This cloth is finished in a chrome/silane hybrid and
is good for any resin. It is folded from one end to
the other and placed in a Ziploc bag so you can keep
it nice and fresh and good to use years down the
road if you don't get around to using it all right
away. |
|
Style 1125
(50.5 x
108")
US $15.25
Free shipping to the 48 continental states
|
|
|
|
Style 3070
(38 x 108")
| Here is 2.74 oz/sq yd fiberglass cloth.
For $ 12.74 per pack with free shipping have any number
of packs of this material delivered right to your door
or P.O. box. Each pack is comprised of a piece that is
38" wide and 108" long. That is 3.16 square yards and
28.5 square feet. This cloth is finished in a Silane and
is intended for any kind of epoxy resin. This is style
number 3070. It has a thread count of 70 x 70 ends per
inch in the warp and fill directions. It has a thickness
of 0.0031". It is folded from one end to the other and
placed in a Ziploc bag so you can keep it nice and fresh
and good to use years down the road if you don't get
around to using it all right away. |
|
Style 3070
(38 x 108")
US $15.74
Free shipping to
the 48 continental states
|
|
|
|
Style 120
(60" x 80")
This is a
fixed listing for a 33
square foot pack of Style
120 3.16 oz/sq yd crowfoot
weave fiberglass cloth. It
is finished in the epoxy
compatible finish CS-310.
CS-310 is a soft finish,
almost as soft as Volan,
that imparts a brownish tint
instead of a greenish tint
like Volan. The clearest
finish we have for the style
120 is CS-724 but it is a
little stiffer than CS-310.
CS-310 finish is for epoxy
only. Volan finishes, that
are based on Chrome, are
good for any resin.
The total for
the cloth is $ 13.16 which
includes insurance and
priority mail shipping -
packs are normally shipped
the same day.
I used
some to cover the wings,
tail feathers and bottom of
fuselage on the guillow's
cessna 170 as you see in the
photos. The gray material
is some silicone coated
fiberglass style 7628 which
I layed up one layer of the
120 on to start with and
squeegied out with
some epoxy 2427 resin. I
put the parts on the first
layer, cut some of the other
wet out cloth, layed it over
and peel plied around the
edges. After cure I lifted
the parts up, pulled the
silicone coated 7628, cut
and trimmed the edges. The
photos show how easily the
cloth contours to these
small 170 wings and the
texture and color of the
fabric.
We have
plenty of the packs ready to
ship and will get them out
ASAP.
You can also buy 50 yard rolls and larger of the
120 - 60" with the CS-310
finish
and in Volan @ $3 per yard
off our website.
We haven't
done any packs of the Volan
finished 120 yet but if we
get enough requests we'll do
some.
This 120
in the CS-310 finish looks
great over wood also and
being just a bit stiffer
than Volan is a little
easier to squeegie out over
larger layups without
distorting.
Thanks for
looking.
|
|
|
|
 |
 |
Style 120
(60" x 80")
US $13.16
Free shipping to the 48 continental states
|
|
|
Style 1678
(44" x 108")
|
For
sale at just $ 13.20
including shipping
is a 44" wide by 108" long piece of some 3.20
ounce fiberglass cloth. It is Style Number 1678 - It has a
thread count of 40 x 40 threads per inch. It is another
perfectly balanced fiberglass fabric we have. It has the
ECG-1/0 yarn in the warp and fill. The thickness of this
fabric is 0.0043". It is finished with a silane for
epoxy resins. Since we have about 122,000 yards of this
material in stock here at our place all nice and boxed and
so few buyers because of the circuit board market the way it
is we are letting this cloth go for no more than the cost of
packing it, putting it in a zip lock bag and in the priority
mail box. |
|
Style 1678
(44" x 108")
US $13.20
Free shipping to the 48 continental states |
|
 |
Style
7721- 38"-
3 yard pack
6 oz
UNIDIRECTIONAL
|
This listing is for a 3
yard pack of some very nice Unidirectional E-glass fiberglass which
is 6 ounces per square yard. It has all the glass going down the
length or warp direcition of the material with only a little bit of
fiberglass in the fill direction. It is 38" in width which includes
the coated edge of the fabric. Unidirectional cloth has a problem
with the edge because of not much holding it together. The coating
on the edge eliminates this problem. You will want to remove this
1/4" coated edge prior to using it in your layups or for the most
part you'll just be making parts where this will be outside the area
to be used. This material is style 7721 and has a silane finish that
is good for any type epoxy resin. This is not to be confused with
the BGF style 7721 which is a 4hs 7.9oz.
7721 - 38" 3 yard pack 6 oz UNIDIRECTIONAL
Fiberglass cloth for epoxy resins - just $ 13.59
shipping included.
This was originally used in the circuit
board industry. The company that used it was producing a superior
circuit board product where they altered the direction of each layer
which provided less tracking for their circuit boards. They closed
up the factory they had in the US or something like that and we
bought the 100,000 plus yards they had in stock. The rolls are
38"(37.5 usable), 44" (43.5 usable) 50"(49.5 usable) and 56 (55.5"
usable).
This is good for using down the length of
the wings, making fiberglass tubes, and any kind of structure where
you want more strength in any one direction.
The finish is a clear silane and has the
advantage of not having the green cast like Volan if its not going
to be painted later and you want it to be clear.
The pack weighs 2 pounds and will be
shipped to right away priority mail in the box you see in the
photos. The 108" piece is folded lengthwise 4 times then wrapped
around the corrugated wrap to keep it from breaking the warp glass.
Payment methods accepted are Paypal, money orders, cashiers check
and company checks. We will also offer open accounts when ordering
full size rolls of approximately 1400
yards.
Thanks for looking.
7721 - 38" 3 yard pack 6 oz
UNIDIRECTIONAL Fiberglass cloth for epoxy resins
|
Style
7721- 38"-
3 yard pack
6 oz
UNIDIRECTIONAL
$ 13.59
Free shipping to the 48 continental states
|
|
       
|
|
Style 7725
8.5 oz/sq yd BID cloth
Twill Fiberglass Fabric
$
19.25 for two yards
|
This is some of the most pliable and conformable
fiberglass you'll ever find. For just $
19.25 have two yards of this material delivered
right to your home, business or PO box. This will be sent right
out after your instant payment with paypal or when we receive your
check.
I layed up some of this cloth with
some epoxy (though polyester works excellent also) on the plastic
face you see in the photos just to show how easily this cloth
conforms to compound curves. The only cutting I had to do was at the
chin. This cloth is way easier to get the bubbles out and get to
lay down than some of the other materials.
Using cloth is a lot stronger than regular chopped
strand mat in repairing body parts. If you lay up pieces on the
inside and outside of a hole in a body panel it'll be stronger than
the original. Use some of the light weight fabrics for the final
outer layers and have a lot less grinding and filling to do later.
This is structural fiberglass with plenty of strength for whatever
you want to use it on.
This cloth is some that we get specially woven.
It's a little higher that some of the other plain and satin weaves
out there but the time and labor you save will far outweigh the
little bit of extra cost.
We have about 4,000 yards in stock but it takes
about three months to get this fabric woven. So buy some now before
we run out. You'll love this stuff.
The $ 19.25 price includes insurance and
free priority mail shipping to anywhere in
the continental U.S.
Pay with paypal, money order, cashier's check or
personal check. If you're mailing payment write "2 yds
of
Style 7725 8.5 oz/s Twill Fiberglass Fabric" on the check or money order.
We usually ship the same or next business day.
Check my 100% positive feedback.
$
19.25 for 2 yds of
Style 7725 8.5 oz/s Twill Fiberglass Fabric
Thanks for looking.
|
|
|
|
9 oz.
Fiberglass Cloth
Satin Weave (2
Yards)
|
Throughout the
years we have bought and sold thousands of yards of
several different styles of 9 oz Satin weave
fiberglass cloth with many different finishes.
Style numbers for the E-glass version
of 9 oz Satin weaves include 181, 1581, 7581 and
7781. The drapability and handling characteristics
of the 9 oz satin weave E-glass vary more depending
on the finish than the weave. All have a 57 by 54
ends/inch count and all are the 8 harness satin
weave. The satin weave fiberglass fabric itself is a
very soft and pliable fabric but because of the the
greater demand of the satin weaves in the aerospace
market several different finishes are used that are
much stiffer than those intended for the open
lay-up. These stiffer finishes are also good for
flat lay-ups but not very good at all for compound
curves.
We brought in a
few rolls of some very nice 9 oz satin weave with
the softest finish on the market. I personally used
some to make the elbow that you see in the photos.
For the elbow I turned the Styrofoam on a shopsmith
lathe, then cut the foam at 45 degrees, shaped it
and with epoxy used about a dozen or so pieces
of the 9 oz satin weave to make the part. I layed up
some around the shovel also to further illustrate
just how flexible this material is. I used epoxy but
the cloth is finished to be used with any resin -
polyester, vinylester, epoxy, etc.
This cloth is
good for doing a lot of different projects because
of it thickness at just 0.0090" it's good for the
final layers in boats, corvettes, etc. It's good for
getting some strong stuff in the hard to get to
spots that will leave you with a surface that'll
take very little finishing. Use some Dacron peel ply
and really have a surface that needs little
finishing. |
2 yd
pack of
satin weave
fiberglass cloth
US $15.81
Free shipping to the 48
continental states
|
|
\
